The MarSurf M 300 (6910411) with 5 um stylus is an advanced and easy to use surface roughness gage/profilometer that is built on the M series platform. The unit boasts a Bluetooth interface between the evaluation unit and the drive unit.  This makes positioning of the unit for assorted measuring applications very easy!  A large, illuminated color display to read the parameters and the profiles allow viewing your measuring results in a poorly lit environment.

The MarSurf M 300 offers an integrated memory for up to 40,000 results or 30 profiles, tolerance monitoring, vertical scale selection, and the setting of unsymmetric intersecting lines for peak count calculation.

Specifications:

• Measuring range of up to 350 μm (.014 in)
• Units μm/μinch selectable
• Standards: ISO/ASME/JIS and MOTIF selectable
• Travsersing length as per DIN EN ISO 4288/ ASME B46.1:
  1.75 mm, 5.6 mm, 17.5 mm (0.07 in, 0.22 in, 0.7 in)
  as per EN ISO 12085: 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm
• Number of sampling lengths selectable from 1 to 5
• Automatic selection of filter and traversing length conforming to standards
• Phase-correct profile filter as per DIN EN ISO 11562
• Cutoff 0,25 mm 0,80 mm 2,50 mm
  (0.010 in 0.032 in 0.100 in)
• Short cutoff selectable
• Parameters as per:
  DIN/ISO: Ra, Rq, Rz, Rmax, Rp, Rpk, Rk, Rvk, Rv,
  Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr, RSm, Rsk
  JIS: Ra, Rz, RzJIS, Sm, S, tp
  ASME: Rp, Rpm
  MOTIF: R, Ar, Rx, W, CR, CL, CF
• Tolerance monitoring in display and measuring record
• Automatic or adjustable scaling
• Printing of R-profile (ISO/ASME/JIS), P-profile (MOTIF), material ratio curve,
  measuring record
• Output of date and/or time of the measurements
• Integrated memory for the results of up to 40,000 measurements and 30 profiles
• Dynamic calibration function
• Locking and/or password protection for instrument settings
• On Shafts, large machines
• Automotive engineering
• On big workpieces
• On milling and turning parts
• On grinding and honing parts
• In the production area to check the roughness of your workpiece!

Scope of delivery
The MarSurf M300 is delivered as a set in a handy carrying case - consisting of:

• MarSurf M300 base unit
• RD18C Drive unit
• 1 standard PHT 6-350 Probe (5 μm radius)
• Built-in Li-Ion battery in both base unit and drive unit
• Built-in printer in base unit
• RD18C Holder (for use with 814N, 814G, CX1 & CX2 height stands
• Probe protection
• Battery charger / AC power supply
• Operating instructions
• Carrying case with shoulder strap
• Neck strap for base unit
• USB cable