The NEW Mahr Pocket Surf has arrived and has some great new features.
- Electronic calibration adjustment (no more potentiometer)
- Ability to switch and view the results of Ra, Rmax/Ry, Rt after the measurement has been performed
- Better output capability (including USB)
Click Here for the Mahr Pocket Surf Accessory Page
| Formerly EMD-1500-311 Now 2191800 |
.0004" radius stylus meeting American ANSI-B46, ISO and MIL specifications, with certification (most popular) |
| Formerly EMD-1500-321 Now 2191802 |
.0002" radius stylus meeting German DIN-4768 and certain ISO specifications, with certification |
| Specifications: | |
| Dimensions: | 140 mm x 76 mm x 25 mm / 5.5" x 3" x 1" |
| Measuring Ranges: | Ra 0.03 μm to 6,35 μm / 1 μin to 250 μin |
| Ry 0,2 μm to 25,3 μm / 8 μin to 999 μin | |
| Rmax0,2 μm to 25,3 μm / 8 μin to 999 μin | |
| Rz 0,2 μm to 25,3 μm / 8 μin to 999 μin | |
| Weight: | 435 g / 14 oz |
| Display Resolution: | 0.01 μm / 1 μin |
| Measurement Accuracy: | Meets ASME-B46.1, ISO, DIN standards and MIL specifications |
Detailed Specifications, Manuals etc. are located at the Downloads tab above the table.
The Mahr Pocket Surf portable surface roughness tester/profilometer is the ideal instrument for making traceable, contact surface
roughness measurements on a large range of surfaces including small inside diameters. This feature packed, portable, affordable gage is the Gold Standard of portable surface finish testers!
The Pocket Surf easily handles a variety of surface roughness measurements including flat, inside/outside diameters and many difficult to gage surfaces.
Built to last, featuring a durable cast aluminum housing, and designed for shop or laboratory use, the Pocket Surf will provide years of reliable and accurate, repeatable surface finish gaging. The Pocket Surf is also designed to take on measurements from a variety of positions and several angles.
It's ease of use includes the ability to work on both horizontal and vertical surfaces and can even be used upside down. The Pocketsurf operates in four probe positions: extended, closed, or with the probe at 90˚, 180˚ or 270˚. Each kit includes a fitted case, specimen, NIST certificate and calibration riser block.
|
Pocket Surf shown with optional #EAS-2496 height stand.
|
Here, the roughness tester is mounted on a height gage, by using Swivel Fixture with T-Bar EAS-3048
|
One of our favorites! Height stand with swivel 2236687. It is very adaptable to many types of parts.
|
| Model # | Description: |
| 4102046 | Printer Cable |
| EGH-1019 | General Purpose Probe with .0004" radius tip. Conical diamond - Included with #EMD-1500-311 Meets ANSI/ISO/MIL Specifications |
| EGH-1026 | General Purpose Probe with .0002" radius tip. Conical diamond - Included with #EMD-1500-321 Meets DIN/ISO Specifications |
| EGH-1020-W2 | Optional Parallel Chisel Probe with .0004" radius sapphire tip. Gages sharp edges or small OD's where probe is perpendicular (in 90˚ or 270˚ position) to axis of traverse. Also for OD's smaller than .25" (6.35mm) staged on #54-400-421 Vee Fixture. |
| EGH-1020-W1 | Optional Traverse Chisel Probe with .0004" radius sapphire tip. Gages sharp edges or small OD's where probe is aligned with (in 180˚ or closed position) axis of traverse. |
| EGH-1028 | Optional Groove Bottom Probe with .0004" conical diamond tip. Gages grooves, recesses and holes to depths of .25" (6.35mm). Also used for short lands and shoulders. It can only be used in the 180˚ position with the Pocket Surf mounted in a height stand or similar fixture. |
| EGH-1021 | Optional Small Bore Probe with .0004" conical diamond tip. Gages small bores 1/8" (3.2mm) minimum ID up to a depth of 3/4" (19mm). It can only be used in the 180˚ position with the Pocket Surf in a height stand or similar fixture. |
| EGH-1027 | Optional Small Bore Probe with .0002" conical diamond tip. Gages small bores 1/8" (3.2mm) minimum ID up to a depth of 3/4" (19mm). It can only be used in the 180˚ position with the Pocket Surf in a height stand or similar fixture. |
2191800 MAHR Pocket Surf Portable Roughness Tester EMD-1500-311
- Brand: Mahr
- Product Code: 2191800
- Condition: New
- Warranty: 1 Year Manufacturer’s Warranty
- Availability: SHIPS FACTORY DIRECT
- Discount: LOW PRICE GUARANTEE!
- $2,960.00
-
$2,664.00
Available Options
Tags: emd-1500-311+cal, mahr-federal, pocket, surf, portable, roughness, tester, .0004 surface, finish 2191800 profilometers, testers