The PHT-6002 Phase II+ Series 6000 UCI/Dynamic Portable Hardness Tester with 2kg Probe - Manual Probe is on sale at Gaging.com. Measure smarter!
- For surfaces with Ra below 200μ"
- Non-Destructive hand held portable hardness tester
- Combines UCI and Leeb portable hardness testing in one state of the art device
- Test steel with min thickness of .08” and unlimited max thickness (Other materials may have larger minimum thickness levels, depending on hardness)
- Blazing fast test results
- Rockwell, Brinell and Vickers hardness test conversions shown on display
- Large Memory w/USB Output
- Choice of manual UCI probes; 1kg, 2kg, 5kg & 10kg
- Optional Motorized Probes: .30kg, .80kg, & 1kgf
- Available Impact Devices (Leeb) D, DC, D+15, G & D
There are two basic methods of portable hardness testing that is accepted in the field today. UCI & Leeb Portable Hardness Testers measuring methods
Ultrasonic Contact Impedance is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The difference in Ultrasonic vibration frequency is then calculated into a hardness value. The UCI portable hardness tester procedure is slower than the Dynamic Impact style, however the “UCI” method of hardness testing is portable, easy and accurate. It also has its own advantages when utilized for certain testing applications. UCI portable hardness testers are not restricted to large mass items like dynamic type testers. These portable hardness testers can test metals as thin as 2mm and at a hardness value as low as 20HRC (75HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact that the UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.
Dynamic Impact is based on the Leeb principle of portable hardness,developed by Dietmar Leeb in the 1970’s. A spring loaded impact body is thrust to the test surface, effecting rebound. The speed of both the initial thrust and the rebound is measured in a non-contact mode. This is calculated as a Leeb hardness value and then automatically converted to Rockwell C, B, Brinell, Vickers and Shore Values. It has effectually brought easy, fast and accurate results to portable hardness testing.
UCI Portable Hardness Testers | ||
Scales-UCI | Measurement Range | Tolerance |
Rockwell C | 20-70 HRC | ± 1.5 HRC |
Rockwell B | 41-99 HRB | ± 1.5 HRB |
Rockwell A | 61-85 HRB | ± 1.5 HRA |
Brinell | 76-618 HB | ± 3% HB |
Vickers | 80-1599 HV | ± 3% HV |
LEEB Portable Hardness Testers | ||
Scales-UCI | Measurement Range | Tolerance |
Rockwell C | 25-67 HRC | ± 1.5 HRC |
Rockwell B | 59-99 HRB | ± 1.5 HRB |
Brinell | 85-651 HB | ± 10 HB |
Vickers | 83-976 HV | ± 12 HV |
Shore | 26-99HS | ± 10HS |
Leeb | 170-960HLD | ± 6HL |
Specifications |
|
Hardness Range | HRC: 20.3- 70; HRB: 61-85.6 ; HV: 80-1599; HB: 76-618 |
Scale Selection | Rockwell C (HRC); Rockwell B (HRB); Rockwell A (HRA); Brinell (HB); Vickers (HV); Leeb (HLD) and many more. |
Tolerance | ± 3.0% deviation of average from the reference value of the hardness test block with a minimum of 5 tests |
Display Type | LCD Color Screen w/Backlight, adjustable brightness |
Language Selection | English, German, Chinese, Spanish, etc. |
Data Logger | Letters, Numerals |
Data Memory | 2000 groups of measured data ; 20 groups of calibration data |
Statistical Software | Supplied-can be saved in Word or Excel |
Data Output | USB – cable supplied |
Power Supply | Rechargeable Lithium Battery: Voltage-4.2V, 4800mAh |
Auto Power Off | 5 minutes |
Recharging Time | Approx. 8 hours |
Battery Usage | Approx. 6 hours (no backlight) |
Net Weight(base unit) | 2lbs with probe |
Gross Weight | 12 lbs |
Unit Dimensions | 7.0 x 3.1 x 1.1” (160 x 80 x 30mm) |
Gross Dimensions | 13.7 x 17.7 x 5.9” (350 x 450 x 150mm) |
Manual UCI Probe Specifications
Probe Type - Model | Loading Force | Probe Diameter | Length | Oscillating Rod Diameter | Surface Roughness Requirements | Min weight of test sample | Minimum thickness of sample |
PHT-6002 | 2kg (20N) | 22mm | 154mm | 2.4mm | Ra<5μm Ra<197μ" |
0.3kg (.66lbs) | 2mm / 0.08” |
PHT-6002 Phase II+ Series 6000 UCI/Dynamic Portable Hardness Tester with 2kg Probe - Manual Probe
- Brand: Phase II+
- Product Code: PHT-6002
- Condition: New
- Warranty: 5 Year Manufacturer’s Warranty
- Availability: Usually Ships Within 24 Hours
- Discount: LOW PRICE GUARANTEE!
- $5,395.00
-
$4,856.00
Tags: pht-6002, phase, ii+, portable, hardness, tester, testers