Model # Description:
54-410-500-0 .0004"/10um radius stylus meeting American ANSI-B46, ISO and MIL specifications (most popular)
54-410-511-0 .0004"/10um radius stylus meeting American ANSI-B46, ISO and MIL specifications with RS-232 output
54-410-600-0 .0002"/5um radius stylus meeting German DIN-4768 and certain ISO specifications
54-410-622-0 .0002"/5um radius stylus meeting German DIN-4768 and certain ISO specifications with RS-232 output


Click Here for the X-Pro Accessory Page

Feature packed, compact and very economically priced, Fowler's X-Pro portable surface roughness tester II is the perfect instrument for making traceable surface roughness measurements on a wide variety of surfaces including small inside diameters. Models with and without RS232 output are available.

Use the X-Pro for a variety surface roughness assessments including flat, inside/outside diameters and many difficult to gage test surfaces.The Fowler XPro Profilometer also has a wide variety of optional probes and fixtures which are available.  The optional height stand #54-400-896-0 shown in the pictures above and below holds the X-Pro both horizontally and angled, perfect for taking easy measurements on any suitable, flat working surface.

Specifications:

Measuring Ranges: Ra-0.03 μm~6.3 μm/1 μ "~250 μ"  Rz-0.2 μm~25.0 μm/8 μ "~999 μ"

Display Resolution: 0.01 μm/1 μ"

Cut-off: 0.25mm/0.8mm/2.5mm, ANSI 2RC Filter

Display: 3-digital LCD

Measure Accuracy: Meets ISO and DIN standards

 Accessories:

Model # Description:
54-400-351-0 SPC Printer & Cable for #54-410-511-0 or #54-410-622-0 only
54-400-300-0 RS232 Output Cable for #54-410-511 or #54-410-622 only
54-420-120-0  AC Adapter Kit
54-400-896-0 Optional adjustable height stand
54-400-319-0 General Purpose Probe with .0004" radius tip conical diamond  Included with #54-400-311 and #54-400-511
Meets ANSI/ISO/MIL Specifications
54-400-326-0 General Purpose Probe with .0002" radius tip conical diamond  Included with #54-400-321 and #54-400-622
Meets DIN/ISO Specifications
54-420-302-0 Optional Parallel Chisel Probe with .0004" radius sapphire tip.
Gages sharp edges or small OD's where probe is perpendicular
(in 90˚ or 270˚ position) to axis of traverse. 
54-420-301-0 Optional Traverse Chisel Probe with .0004" radius sapphire tip.  Gages sharp edges or small OD's where probe is aligned with
(in 180˚ or closed position) axis of traverse.
54-420-328-0 Optional Groove Bottom Probe with .0004" conical diamond tip.  Gages grooves, recesses and holes to depths of .25" (6.35mm).  Also used for short lands and shoulders.  It can only be used in the 180˚ position with the X-Pro mounted in a height stand or similar fixture.
54-420-321-0 Optional Small Bore Probe with .0004" conical diamond tip.
Gages small bores 1/8" (3.2mm) minimum ID up to a depth of 3/4" (19mm).  It can only be used in the 180˚ position with the X-Pro mounted in a height stand or similar fixture.
54-420-327-0 Optional Small Bore Probe with .0002" conical diamond tip.
Gages small bores 1/8" (3.2mm) minimum ID up to a depth of 3/4" (19mm).  It can only be used in the 180˚ position with the X-Pro mounted in a height stand or similar fixture.

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Do you have any questions about 54-410-600-0 Fowler X-Pro Portable Surface Roughness Testers II, 5um?

Captcha

54-410-600-0 Fowler X-Pro Portable Surface Roughness Testers II, 5um

  • Brand: Fowler
  • Product Code: 54-410-600-0
  • Condition: New
  • Warranty: 1 Year Manufacturer’s Warranty
  • Availability: Usually Ships Within 24 Hours
  • Discount: LOW PRICE GUARANTEE!
  • $2,265.94
  • $1,836.00


Tags: 54-410-600-0, fowler, x-pro, portable, surface, roughness, testers, ii, , 5um, tat profilometers